Interlogix NVR 21 (S/P) User Manual - Manual (Page 47)

Chapter 5: Live view
TruVision NVR 21(S/P) User Manual 41
Figure 19: Time and date settings screen
Table 14: Description of the time and date settings screen
Option Description
Time zone Select the time zone of the recorder from the drop-down list.
Date format Select the date format from the drop-down list. Default format is MM-DD-
YYYY.
Time format Select the time format from the drop-down list. Default format is 24-hour
format.
Display week Display the day of the week in the monitor time bar.
Check the box to enable/disable. Default format is Disable.
System date Define the system date.
Default date is the current date.
System time Define the system time.
Default time is the current time.
Auto DST adjustment Define DST is automatically. It depends on the time zone selected.
Default format is Disable.
Enable DST Manually define DST. If this option is selected, the Auto DST adjustment
option is disabled.
Default format is Disable.
Click the check box to enable or disable daylight savings time (DST).
From Enter the start date and time for daylight savings.
To Enter the end date and time for daylight savings.
DST bias Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.