Interlogix NVR 21 (S/P) User Manual - Manual (Page 61)

Chapter 7: Playing back a recording
TruVision NVR 21(S/P) User Manual 55
3. Click Pause on the toolbar to pause playback.
Click Play to restart playback.
Click Stop to stop playback and return to live view.
All-day playback
Use this option to play back recorded video from the past 24 hours. Playback starts at
midnight and runs for the 24-hour period. All-day playback is shown in full screen view.
See Figure 23 on page 52 for a description of the playback control toolbar.
• Using the mouse:
1. In live view mode right-click the mouse on the desired camera image. In the mouse
toolbar click All-day Playback .
The playback screen appears. By default, the camera is in full-screen mode.
2. To select more than one camera for multiview playback or to select playback from a
different day, move the mouse to the right edge of the screen. The camera list and
calendar appear. Check the desired cameras and/or another day.
Playback starts immediately.
Note: A message appears if there are no recordings found during this period.
3. Use the playback control toolbar to manually control playback.
4. Click Exit to return to live view.
– Or –
Right-click the mouse and click Exit from the mouse menu to return to the previous
screen.
• Using the front panel:
1. Select the camera for playback and press the Play button. Playback from the
selected camera starts immediately.
Note: Multiview playback is only available using the mouse. If live view was showing
multiview, only the camera in the top-left channel on screen will be played back.