Interlogix NVR 21 (S/P) User Manual - Manual (Page 133)

Chapter 14: Camera settings
TruVision NVR 21(S/P) User Manual 127
2. Select the camera for which to set up privacy masking.
3. Check the Enable Privacy Mask box to enable the feature.
4. Set up the mask area. Up to four areas can be set.
Using the mouse, click and drag a privacy-mask box in the camera view screen over
the desired area. You can set up to four areas for privacy masking. Masked areas
are dimmed and outlined in four different colors. Click
Apply to save settings.
To delete a mask, click Clear for that color mask, or click Clear All .
5. Click Apply to save the settings and then click Back to return to live view.
Adjusting video image settings
You may need to adjust the camera image depending on the location background in
order to get the best image quality.
The system has four preset mode settings for frequently encountered lighting
conditions: Standard, Bright, Soft, and Vivid. However, you can also manually adjust
the brightness, saturation, contrast, and hue values using the Customize option.
Adjustments to the settings affect both live view and recorded images.
Note: These options can also be modified from the image settings button on the live
view quick access toolbar (see “Accessing frequently used commands” on page 34.)
To adjust display settings:
1. From the menu toolbar, click Camera Management > Image .
2. Select the camera for which to adjust the video image settings.
3. Select the desired mode value. Changes are seen immediately on screen.
If “Customize” is selected, adjust the brightness, saturation, contrast, and hue
values by dragging each scroll bar.
4. Click Apply to save the settings and then click Back to return to live view.