Interlogix NVR 21 (S/P) User Manual - Manual (Page 49)

TruVision NVR 21(S/P) User Manual 43
Chapter 6
Controlling a PTZ camera
You can control PTZ dome cameras using the buttons on the front panel, the keypad,
and IR remote control as well as using the PTZ control panel accessed with the mouse.
Access to PTZ commands may require a password.
Changing PTZ camera settings
You can easily change the PTZ protocol and address of the camera.
A detailed list of the PTZ commands available for many different camera protocols is
available in Appendix F on page 157.
To change a PTZ camera settings:
1. From the menu toolbar, click PTZ Settings > General .
2. Enter the desired PTZ protocol and address.
3. Click Back to return to live view.
Calling up presets, tours and shadow tours
When in live view you can quickly call up the list of existing presets, preset tours, and
shadow tours by using the front panel, remote control, mouse, and keypad.
Front panel Press Enter. PTZ control panel appears.
Mouse Left-click the mouse on the desired camera image. The quick access toolbar
appears. Click the PTZ control icon to enter PTZ mode. The PTZ control panel
appears.
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter button on the keypad. For further information, see Appendix D
“KTD-405 keypad” on page 147.
If the display is in multiview format, it changes to full screen format for the selected
camera. See Figure 20 below for a description of the PTZ control panel.