Interlogix NVR 21 (S/P) User Manual - Manual (Page 17)

TruVision NVR 21(S/P) User Manual 11
Chapter 3
Getting started
Turning on and off the recorder
Before starting the power up process, connect at least one monitor to the video out or
the VGA interface. Otherwise, you will not be able to see the user interface and operate
the device.
The recorder auto-detects the video mode (PAL or NTSC) on startup.
It is equipped with an universal power supply that will auto-sense 100/240 V, 60/50 Hz.
Note: It is recommended that an uninterruptible power supply (UPS) is used in
conjunction with the device.
To turn on the recorder:
Turn on the recorder using the power switch on the back panel. The power LED
illuminates. A splash screen appears indicating that the recorder is starting up.
The Start Up Wizard window will appear.
To turn off the recorder:
1. In live view mode, right-click the mouse and click Menu . The main menu screen
appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Shutdown . Click Yes to confirm shutdown.
To reboot the recorder:
1. In live view mode, right-click the mouse and click Menu . The main menu screen
appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Reboot . Click Y es to confirm reboot.