Interlogix NVR 21 (S/P) User Manual - Manual (Page 80)

Chapter 9: Using the web browser
74 TruVision NVR 21(S/P) User Manual
Menu Function Description
Video Settings Define general recording settings. See “Configuring
recording schedules” on page 85 for more information.
Recording Schedule Define the recording schedules. See “Configuring recording
schedule” on page 85 for more information.
Motion Detection Define motion detection parameters. See “Setting up motion
detection” on page 98 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Setting up
privacy masking” on page 126 for more information.
Tamper-proof Define the video tampering detection settings. See
“Detecting video tampering” on page 104 for more
information.
Video Loss Define the video loss detection settings. See “Detecting
video loss” on page 103 for more information.
Text Overlay Add extra lines of text on screen. See “Text overlay” on page
82 for more information.
Covert Camera Define the cameras whose images cannot be displayed by
those not logged in. See “Hiding a camera image from view”
on page 128 for more information.
OSD Capture
Settings Define the image quality of snapshots.
Manual Record Define which cameras can manually record. See “Manual
recording” on page 88 for more information.
Network Settings General Define the general network settings. See “Configuring
general network settings” on page 105 for more information.
PPPoE Define the PPPoE settings. See “Configuring PPPoE” on
page 107 for more information.
DDNS Define the DDNS settings. See “Configuring DDNS” on page
107 for more information.
Email Define the settings to send an e-mail. See “Configuring e-
mail” on page 109 for more information.
Network Storage Define the remote storage system for recorder recordings.
See “Using a network storage system” on page 82 for more
information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “Configuring UPnP”
on page 110 for more information.
FTP Define the FTP settings. See “Configuring an FTP server to
store snapshots” on page 111or more information.
SNMP Define the SNMP settings. See “Configuring SNMP” on page
109 for more information.
More Settings Define a remote alarm host, multicast IP as well as the
server, HTTP, and RTSP ports. See page 111 for more
information.
Serial Port
Settings 232 Serial Port Define the RS-232 parameters. See “Configuring the RS-
232 port” on page 129 for more information.
485 Serial Port Define the RS-485 parameters.