Interlogix NVR 21 (S/P) User Manual - Manual (Page 126)

Chapter 13: Storage management
120 TruVision NVR 21(S/P) User Manual
To set up bad sector detection:
1. From the menu toolbar, click System Settings > HDD > Bad Sector Detection .
2. Select the HDD you want to test.
3. Select whether you want to do a key sector detection or a full detection, and click
Detect.
4. The system checks the HDD. The color-coded result is displayed on screen. If there
are bad sectors found, click Error Info to see a list of the errors found.
5. If required, click Pause to pause the test or Cancel to cancel it.
6. Click Back to return to live view, or continue configuring the NVR settings.