IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 69)

59
while the next HDD is no empty, then system stops recording, If the current HDD is full and
then next HDD is not empty, then system over writes the previous files.
 Pack duration: Here is for you to specify record duration. The value ranges from 60 to 120
minutes. Default value is 60 minutes.
 DVR No: When you are using one remote control (not included in the accessory bag) to
control several DVRs, you can give a name to each DVR for your management.
 Video standard: There are two formats: NTSC and PAL.
 Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
 Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Other wise, it will go to the login interface.
 Device ID: Please input a corresponding device name here.
 Real-time playback: It is to set playback time you can view in the preview inter face (chapter
4.2 Live Viewing). The value ranges from 5 to 60 minutes.
 Startup wizard: Check the box here, system goes to the startup wizard when the device
boots up the next time. Other wise, it goes to the system login inter face directly.
 Navigation bar: Check the box here, system displays the navigation bar on the interface.
Note:
Since system time is ver y important, do not modify time casually unless there is a must!
Before your time modification, please stop record opera tion first!
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-3
Figure 5-4