IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 64)

54
Figure 4-42
Note:
 Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.
 You need to refer to your speed dome user ’s manual for Aux definition. In some cases, it
can be used for special process.
 The following setups are usually operated in the
X 332 H33 2H33 2H
Figure 4-38, Figure 4-41 and Figure 4-42.
4.9.1Preset Setup
In Figure 4-38, use eight direction arrows to adjust camera to the proper position.
In Figure 4-41, click preset button and input preset number. The interface is shown as in Figure
4-43.
Now you can add this preset to one tour.
Figure 4-43
4.9.2 Activate Preset
In Figure 4-42, please input preset number in the No. blank, and click preset button.
4.9.3 Patrol setup (Tour Setup)
In Figure 4-38, click patrol button. The interface is shown as in Figure 4-44.Input preset number
and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.
Figure 4-44