IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 48)

38
4.5.1.2 Redundancy
Redundancy function allows you to memor ize record file in several disks. When there is file
damage occurred in one disk, there is a spare one in the other disk. You can use this
function to maintain data reliability and safety.
In the main menu, from Setting to Schedule, you can highlight redundancy button to enable
this function. See F igure 4-14.
In the main menu, from Advanced to HDD management, you can set one or more disk( s) as
redundant. You can select from the dropdown list. See F igure 4-16. System auto over write s
old files once hard disk is full.
Please note only read/write disk or read-only disk can backup file and support file search
function, so you need to set at least one read- write disk other wise you can not record video.
Note
About redundancy setup:
 If current channel is not recording, current setup gets activated when the channel begin
recording the next time.
 If current channel is recording now, current setup will get activated right away, the current file
will be packet and form a file, then system begins recording as you have just set.
After all the setups please click save button, system goes back to the previous menu.
Figure 4-16
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
 Set redundant disk(s) as read-only disk or read-write disk (Main menu->Advanced->HDD
management) . See Figure 4-16.System needs to reboot to get setup activated. Now you can
search or playback file in redundant disk.
 Dismantle the disk and play it in another PC.
4.5.2 Snapshot
Please note the 24/32-channel series product supports 24/32-channel snapshot
function.
4.5.2.1 Schedule Snapshot