IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 19)

9
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series
DVR for the first time, please refer to this part first.
2.1 Front Panel
2.1.1 1.5U series
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up
or shut down DVR.
USB port
To connect USB storage device, USB mouse.
Up/
Down
、
Activate current control, modify setup, and then move up
and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Input number 1/4.
Left/
Right
 
Shift current activated control, and then move left and right.
When playback, click these buttons to control playback bar.
Input number 2/3.
Enter ENTER
Confirm current operation
Go to default button
Go to menu
Reverse/Pau
se
 
In normal playback or pause mode, click this button to
reverse Playback
Input number 5.
In reverse playback, click this button to pause playback.
Input number 5.
Play/Pause

In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
Input number 6.
Slow play
Multiple slow play speeds or normal playback.
Input number 8.
Fast play

Various fast speeds and normal playback.
Input number 7.
Play previous I 
In playback mode, playback the previous video.
Input number 9.