IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 52)

42
 Period: Click set button, you can see an interface is shown as in Figure 4-23. Here you can
set for business day and non-business day. In Figure 4-23 click set button, you can see an
interface is shown as in Figure 4-24. Here you can set your own setup for business day and
non-business day.
 Anti-dither: Here you can set anti-dither time.
 Alarm output: when alarm occurred, system enables peripheral alarm devices.
 Tour: Here you can enable tour function when alarm occurs. System one-window tour.
Please go to chapter 5.3.9 Display for tour interval setup.

Snapshot: You can enable this function to snapshoot image when alar m occur s.
Please highlight icon to select the corresponding function. After all the setups please click
save button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in
each channel may not be the same.
In F igure 4-21, you can left click mouse and then drag it to set a region for motion detection.
Click Fn to switch between ar m/ withdraw motion detection. After setting, click enter button to exit.
Figure 4-20
Figure 4-21