IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 41)

31
There are three statuses: schedule/manual/stop. Please highlight icon “○” to select
corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
 Schedule: Channel records as you have set in recording setup ( Main Menu->Setting-
>Schedule)
 Stop: All channels stop recording.
Figure 4-7
4.3.1.3 Enable/disable record
Please check current channel status: “○” means it is not in recording status, “●” means it is in
recording status.
You can use mouse or direction key to highlight channel number. See F igure 4-8.
Figure 4-8
4.3.1.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
 All channel schedule record
Please highlight “ALL” after “Schedule”. See Figure 4-9.
When system is in schedule recording , all channels will record as you have previously set
(Main menu->Setting- >Schedule).
The corresponding indication light in front panel will turn on.