IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 68)

58
Figure 5-1
5.3 Setting
In main menu, highlight setting icon and double click mouse. System setting interface is shown
as below. See Figure 5-2.
Figure 5-2
5.3.1 General
General setting includes the following items. See Figure 5-3.
 System time: Here is for you to set system time
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three denotations to separate date: dot, beeline and solidus.
 DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 5-4. Here you can set start time and
end time by setting corresponding week setup. In F igure 5-4, enable date button, you can
see an inter face is shown as in Figure 5-5. Here you can set start time and end time by
setting corresponding date setup.
 Time format: There are two types: 24-hour mode or 12-hour mode.
 Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Ita lian, Japanese, French, Spanish ( All languages listed here are optional. Slight
difference maybe found in var ious series.)
 HDD full: Here is for you to select working mode when hard disk is full. There are two options:
stop recording or rewrite. If current working HDD is over wr itten or the current HDD is full