IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 60)

50
Click backup button, system begins burning. At the same time, the start button becomes stop
button. You can view the remaining time and process bar at the left bottom. See Figure 4-34.
You can see the corresponding dialogue box if the backup succeeded or failed.
Figure 4-34
 File format: Click the file format; you can see there are two options: DAV/ASF.
 Picture backup: Please set the corresponding time, channel and then select the type as
PIC from the dropdown list. See Figure 4-35. Please click the Add button and then select
the pictures. Click the Start button; you can copy the specified pictures to the selected
portable devices.
Figure 4-35
 One key backup: It includes three steps: the search, select all, start the backup. You can
skip the above three steps and then copy all the searched files directly.
The file name for mat usually is: SN_CH+channel number+time Y+M+D+ H+M+S. In the file
name, the YDM for mat is the same as you set in general interface. (Main Men u - >Setting -
>General).File extension name is .dav.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The
system will not ter minate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five
files, system only save the previous 5 files in the device ( But you can view ten file names).