Receiver and servo installation, Receiver and servos connection – Futaba 14SG 2.4GHz User Manual

Page 41

Text mode
Original mode

RECEIVER AND SERVO INSTALLATION

Receiver switch

Receiver battery

Charging port

Servos

R7008SB

(output connector section)

sCH1~6: Output connectors 1~6
s"

CH1~8,

Receiver and servos connection diagram

Always connect the necessary number of servos.

The receiver channel assignment depends on the

model type. See the Servo connection by model
type tables.

Receiver and servos connection

Connect the receiver and servos in accordance with the connection diagram shown below. Always read the

section [Before using]. When mounting the receiver and servos to the fuselage, connect the necessary points
in accordance with the model's instruction manual.