2 installation of the vgraph user interface – EVCO EPU2BXP1S1 User Manual
Page 8
EVCO S.p.A.
c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 8 of 68
To remove the devices, first remove any terminal board with extractable screws inserted in the lower part and then
operate on the DIN guide clip using a screwdriver, as indicated in the following drawing.
3
4
2.2.2
Installation of the Vgraph user interface
Installation is envisioned:
-
on panel
-
recessed in the wall in traditional box (506 E type)
-
on the wall, on the EVCO CPVW00 support (to be ordered separately).
The following drawing illustrates panel installation, with 4 screws (supplied).
The EVCO CPVP* plaques can be applied to the terminal front panel (to be ordered separately, in plastic and available
in two colours, black and white).