EVCO EPU2BXP1S1 - Manual (Page 24)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104
EVCO
page 24 of 68
In the VARIOUS PARAMETERS menu stand other general parameters, moreover, entering this menu it is possible to
access the page for resetting the parameters to factory default values.
4.2.7 Main OFF page
The main OFF page changes depending on the reason why the unit is OFF. There are three possibilities:
1. Unit OFF: Unit switched-off pushing the relevant key
2. Unit OFF by Start-Stop: Unit ON by key but OFF due to digital contact DI/2 Start-Stop in “Stop” position
3. Unit OFF by Supervisor: Unit ON by key but OFF due to a Modbus command from the supervision module.
4. Unit OFF by Alarm: Unit switched-ON by key but switched-OFF due to unit block alarms.
Note: The MANUFACTURER menu can only be accessed if the unit is in one of these states.