EVCO EVF328J9 - Manual (Page 49)

EVCO S.p.A. EVF 300 series | Installer manual ver. 1.1 | Code 144F300E114
Page 49 of 62
AL2
electric absorption protection input alarm
solutions:
- check the causes of the activation of the input; see parameter i16,
main consequences:
- if the alarm occurs when the device is on, a cooking cycle cannot be started
- if the alarm occurs during a cooking cycle, the cycle will be interrupted
- the effect established with parameter i15
PF
power supply cut-off alarm
solutions:
- check the device-power supply connection
- press and release the key
main consequences:
- the device re-proposes the state in which it was found when the power supply was cut-off
- if the alarm should occur during the cooking timer count and the duration of the power supply
cut-off is less than the time established with parameter r13, on restoring the power supply, the
cooking timer count will be re-proposed (if vice versa, the duration of the cut-off is longer than
the time established with parameter r13, on restoring the power supply, the cooking timer count
will be interrupted).
PF1
power supply cut-off during cooking timer count alarm, of duration such not to cause the interruption of the
cooking cycle
solutions:
- check the device-power supply connection
- press and release the key
main consequences:
- no consequence
PF2
power supply cut-off during cooking timer count alarm, of duration such to cause the interruption of the
cooking cycle
solutions:
- check the device-power supply connection; see parameter r13
- press and release the key
main consequences:
- the cooking cycle will be interrupted
CEr
firmware alarm of the original settings not coinciding with that of the destination settings
solutions:
- cut the device power supply off
- check that the original setting firmware coincides with that of the destination settings
main consequences:
- no consequence