EVCO EVF328J9 - Manual (Page 29)

EVCO S.p.A. EVF 300 series | Installer manual ver. 1.1 | Code 144F300E114
Page 29 of 62
If a weekly programmed switch-on is modified by
pressing and releasing the “PROGRAMS” key, of
the “UP” key and the “DOWN” key after the
function has been activated, this modification will
not be saved.
Operate as follows to exit the procedure before the operation
is complete:
5. Press and release the ”ON/STAND-BY” key or do
not operate for 15 s (any modifications will not be
saved) .
10.4 Deactivating the "weekly
programmed switch-on"
function
Operate as follows to deactivate the "weekly programmed
switch-on":
1. Make sure no procedures are in progress.
2. Hold the “START/STOP” key down for 1 s: the
DELAY LED will switch off.