Same ip address on multiple devicemasters, Same ip address – Comtrol PortVision DX User Manual
Page 89
PortVision DX User Guide
Same IP Address on Multiple DeviceMasters
If you use duplicate IP addresses for DeviceMasters that the
you may lose the DeviceMaster connection completely. Make sure that the DeviceMasters are
not daisy-chained to another.
1.
Right-click the DeviceMasters in the Device Tree or Device List pane, which you want to
assign the IP addresses and then click Assign IP to Multiple Devices (optionally, use
the Manage menu).
2.
If you want to assign the same IP address to all units, click Use the same IP address for
all the selected devices.
3.
Click Yes to the Assign Duplicate IP popup message.
4.
Enter the IP address that you want programmed into the DeviceMasters.
5.
Click Proceed.
6.
After programming the network information, you need to verify that you have the
loaded before performing any other DeviceMaster configuration
procedures.
You can use the Web Interface tab if you need to configure socket or serial tunneling settings or
you can use the
feature. Optionally, you can modify socket or serial tunneling settings
using the
tab if you are familiar with the parameters.
Network Configuration
- DeviceMaster LT/PRO/RTS/Serial Hub/500
89