Comtrol PortVision DX - Manual (Page 108)

PortVision DX User Guide
Checking Protocol-Specific Firmware Versions
The DeviceMaster UP may or may not have come from the factory loaded with the protocol
firmware that you want to configure.
The first step is to check to see if the appropriate firmware is loaded and if it is the latest version.
1. If necessary, click Scan so that the DeviceMaster UP displays.
2. Check the name and version number of the Software Version loaded on the
DeviceMaster UP.
3. If the Software Version displays as SocketServer, you will need to download the protocol
firmware that you want to configure.
4. If the appropriate protocol displays, check the Comtrol ftp site to see if a later version is
available.
5. If the version on the ftp site is later than the version on the DeviceMaster UP, download
the file and then go to
Uploading Protocol-Specific Firmware .
If the firmware type is the protocol that you want to configure and the version on the
DeviceMaster UP is current, you are ready to open the configuration web page using the
DeviceMaster UP IP address or highlight the DeviceMaster UP in PortVision DX and click the
Webpage button.
You can download and access the latest Quick Start and User Guides for your protocol for
configuration procedures.
108
Firmware - DeviceMaster UP