Add new device screen (managed) – Comtrol PortVision DX User Manual
Page 65
PortVision DX User Guide
Add New Device Screen (Managed)
Use the Add New Device screen to configure Comtrol Ethernet attached products that are not on
the local network or to add a new Comtrol Ethernet attached product manually, if you do not want
to scan the network.
The
screen can be accessed from the Manage menu by clicking Add New...
Device or by right-clicking a folder or device and then clicking Add New... Device from the menu.
The following table provides information about the Add New Device fields. You can refer to
for procedures. You can change this information using the
the Properties screen.
Add New Device
Description
Device Type
Select the type of Comtrol Ethernet attached product that you want to
add to PortVision DX.
Device Model
This drop down list contains the Comtrol Ethernet attached product
model list.
Device Name
You must enter a Device Name for the Comtrol Ethernet attached
product.
Detection Type
(DeviceMaster, Only)
If this is a DeviceMaster, click one of the Detection Types:
•
REMOTE (default) means that the Comtrol Ethernet attached
product is not connected to this segment of the network.
•
LOCAL means that the Comtrol Ethernet attached product is on
this local network segment.
Add New Device Screen - Managed
65