Comtrol DeviceMaster LT - Manual (Page 88)

88 - Managing the DeviceMaster LT DeviceMaster LT User Guide: 2000586 Rev. B
Restoring Serial Port Settings
5. If a higher version of SocketServer is available and you want to update the
DeviceMaster LT with the latest software:
a. Update SocketServer using Uploading SocketServer with PortVision DX
on Page 24.
b. Download the latest driver from ftp://ftp.comtrol.com/dev_mstr/LT/drivers/
win7 .
c. Update to the latest driver using the DeviceMaster LT Device Driver (NS-
Link) User Guide, which can be downloaded using Page 9 or viewed on the
Comtrol CD shipped with the DeviceMaster LT.
Restoring Serial Port Settings
Use the web page and/or the NS-Link device driver for Windows to restore the
serial port settings to their default values.
The NS-Link serial port settings are independent of the socket serial port settings
on the web page. If you are using COM ports and also have configured the port for
socket services, you must restore the default port settings in the driver and web
page.
NS-Link COM Port You can use this procedure to reset NS-Link serial port settings.
1. Open the Comtrol Drivers Management Console using Start > Programs >
Comtrol > DeviceMaster LT or under Control Panel, Comtrol Drivers Management
Console.
2. Highlight the first port that you want reset to default values.
3. Click the Defaults button (and if appropriate, Clone).
4. Click Apply or Ok.
If necessary, you can reset DeviceMaster LT device properties to their defaults on
the Device General tab using the Defaults button.
Socket Port Use the following procedure to reset the socket port serial settings.
1. Open the DeviceMaster LT web page ( Accessing Socket Configuration on Page
43).
2. Scroll to the bottom of the Server Status page (main) and click Reboot.