Comtrol DeviceMaster LT - Manual (Page 10)

10 - Introduction DeviceMaster LT User Guide: 2000586 Rev. B
Locating Software and Documentation
If you are not sure what files are required for your installation, each Installation
Overview subsection also provides links to the required files in this Guide.
Software Description/Documentation File
Configuration
Applic
atio
n
PortVision DX
Install on a Windows host to configure
the IP address and upload SocketServer
on the DeviceMaster LT.
Sock
etSer
v
er
SocketServer
This is the firmware that comes pre-
installed on your DeviceMaster LT
platform.
You may need to upload the latest
version of SocketServer before installing
and configuring drivers or configuring
sockets.
Note: May sure that you download
SocketServer for the DeviceMaster
LT (link at right). Other
DeviceMaster models use a unique
version of SocketServer.
De
vic
e D
r
iv
er
Linux
Install if you want tty ports. Refer to the
Readme file compressed in the Linux
driver assembly for driver configuration
procedures.
Windows 8
Windows Server 2012
Windows 7
Windows Server 2008
Windows Vista
Windows Server 2003
Windows XP
Install if you want COM ports.
Refer to the DeviceMaster Device Driver
(NS-Link) User Guide . for detailed
information.
Bootl
oader Bootloader
The operating system that runs on the
DeviceMaster LT hardware during the
power on phase, which then loads
SocketServer.
Only update the Bootloader on your
DeviceMaster LT if advised by Technical
Support or the ftp site when checking for
the latest SocketServer or device driver
version.
Note: May sure that you download
Bootloader for the DeviceMaster
LT (link at right). Other
DeviceMaster models use a unique
version of Bootloader.
This
Gu
ide Any
You can check for the latest version of
this Guide.