Comtrol DeviceMaster LT - Manual (Page 80)

80 - Managing the DeviceMaster LT DeviceMaster LT User Guide: 2000586 Rev. B
Saving Port-Level Configuration
5. Optionally, change the default file name and click Save.
6. Repeat the previous steps for each DeviceMaster LT for which you want to
save the driver configuration.
Saving Port-Level
Configuration Use the following procedure to create and save a port configuration file. Port
configuration, must be saved on a port-by-port basis.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click the Comtrol
Drivers Management Console.
• Shortcut; located under Start> Program Files> Comtrol> DeviceMaster LT>
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.
3. Highlight the DeviceMaster LT for which you want to save the port-level
configuration.
4. Highlight the port for which you want to save port configuration.
5. Click Save Configuration.
6. Repeat this process for each port for which you want to save the configuration
settings.