Comtrol DeviceMaster LT - Manual (Page 22)

22 - Initial Configuration DeviceMaster LT User Guide: 2000586 Rev. B
Checking the SocketServer Version
Checking the SocketServer Version
SocketServer refers to the web page that is integrated in the firmware that comes
pre-installed on your DeviceMaster LT platform, which provides an interface to
TCP/IP socket mode configuration and services. If you install an NS-Link device
driver, an NS-Link version of SocketServer loads on the DeviceMaster LT.
Note: Technical Support recommends that you update to the latest version of
SocketServer before installing an NS-Link device driver or configuring
socket ports.
Use the following procedure to check the SocketServer version on the
DeviceMaster LT and check the ftp site for the latest version.
1. If necessary, open PortVision DX > Start/Programs > Comtrol > PortVision DX >
PortVision DX or use the desktop shortcut and scan the network.
2. Check the SocketServer version number of the Software Version for the
DeviceMaster LT.