American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 58)

48
APPENDICES
Specifications
Patient population: Adult and pediatric patients (age 3 and above).
Method of measurement: Oscillometric
Initial inflation pressure: 160mmHg +/- 20mmHg
Blood pressure range (mmHg): 60< Systolic BP< 270, 30< Diastolic BP< 170
Blood pressure accuracy: Measurements determined with this device are equivalent to those obtained by a
trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by
the American National Standard, Manual, electronic or automated sphygmomanometers.
Blood pressure determination time: 30-40 seconds typical for Adult cuff
Pulse rate range: 30-200 bpm +/- 2% or +/- 3 bpm, whichever is greater
Temperature range: 86 °F (30.0°C) – 109.4°F (43.0°C)
Temperature accuracy: +/- 0.2 °F (+/-0.1°C)
Functional oxygen saturation range: 40-100%
Functional oxygen saturation accuracy: 70-100% +/- 2 digits
(Note: because pulse oximeter equipment measurements are statistically distributed, only about
two-thirds of pulse oximeter equipment measurements can be expected to fall within ± 2 digits of
the value measured by a CO-oximeter.)
Operating conditions: 10
°C (50°F) to 40°C (104°F) Less than 90% RH
Storage conditions: -20
°C (-4°F) to 55°C (131°F) Less than 90% RH
Power: External power supply, AC adapter (ADC item number 9000AC9V)
Calibration: Check once per year for BP and Temperature