American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 52)

42
FAQs
Can I obtain replacement copies of the ADview CD and manual?
Copies of the ADview manual are available through the Customer Service area of our website. To download
the manual, please visit
www.adctoday.com/adview . For a replacement CD, please email Customer
Service at [email protected]
How do I clean the ADview device?
The ADview requires only minimal cleaning. Wipe it down occasionally with a soft, damp cloth. Never
immerse the device or apply cleaning fluid or solvents.
How do I install the rechargeable battery in the ADview?
Remove the battery bay cover and position the rechargeable battery within, ensuring proper alignment of
polarities. Replace the cover securely and connect the device to AC mains power via the power supply to
turn the device on. Ensure the battery is fully charged before use. (See page 33 for detailed instructions.)
How often should I calibrate the BP Module for the ADview?
You should check the calibration once a year. If there is a difference larger than 2 mmHg against the
pressure reference, then contact an authorized service center on page 46.
How accurate is the ADview blood pressure device?
The ADview, designed for accuracy, has been manufactured to comply with AAMI SP10 protocol, and has
been independently validated to both the British Hypertension Society (BHS) and European Society of
Hypertension (ESH) standards for clinical accuracy.
What method of blood pressure measurement is used in the ADview?
The ADview takes automated BP measurements using the oscillometric method. It supplements this with
the ability to take measurements as you would if you were using a mechanical sphygmomanometer.
Can I upgrade my current version of ADview at a later date?
To upgrade your ADview device, please review the list of accessories on page 58 or on our website. Contact
your local distributor for details.