American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 5)

v
Indications for Use
The ADview NIBP , Temperature, and Pulse Oximeter device is indicated for use in measuring and
displaying Systolic and Diastolic blood pressures, pulse rate, temperature, and functional oxygen saturation
(SpO
2
) of adult and pediatric patients in hospitals, medical facilities, clinics, physicians offices, and other
sub-acute environments.
User Responsibility
Your ADview product is designed to perform in conformity with the description contained in this operation
manual and accompanying labels and inserts, when assembled, operated, maintained and repaired in
accordance with the instructions provided. It is your responsibility to:
• Check calibration of the device annually.
• Never knowingly use a defective device.
• Immediately replace parts that are broken, worn, missing, incomplete, damaged or contaminated.
• Contact the nearest factory approved service center should repair or replacement become
necessary. A list of approved service centers appears on pages 44-47 or on our website at
www.adctoday.com.
Further, the user of the device bears sole responsibility for any malfunction that results from improper use,
faulty maintenance, improper repair, damage or alteration by anyone other than ADC or authorized service
personnel.
Warnings and Contraindications
Please read this manual thoroughly before starting to use your ADview. Only those clinicians trained to
measure, record and interpret vital signs should use this device.
Do not use this device on pediatric patients under 3 years old, infants, or neonates.
The ADview must be charged before using it for the first time.
For accurate blood pressure measurements, ensure that the circumference of the arm fits
within the range markings on the cuff.