American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 21)

11
ICON/DISPLAY INDICATES…
Warning! The device is unable to take a valid
reading. See page 38 for troubleshooting details.
A measurement is in progress. If the column is
rising, the cuff is being inflated; if the column is
falling, the cuff is deflating. Each segment lit is
approximately equivalent to 10 mmHg.
Visual Cues - Temperature Module
ICON/DISPLAY INDICATES…
Temperature shown in degrees Fahrenheit.
Temperature shown in degrees Celsius.
“Traveling dash” in temperature display
The unit is taking a measurement in predictive
measurement mode.
Warning! There is an error in the measurement or
module. Please check the status code in the
troubleshooting section on page 39 for details and
solutions.
The device is set to measure an oral temperature.
The device is set to measure an axillary
temperature.
The device is set to measure a rectal temperature.
The unit is taking a measurement in direct
measurement mode. The display of
alternates
with the current probe temperature.
Temperature value flashes
The unit is taking a measurement in direct
measurement mode, but the reading is currently out-
of-range.
Temperature value flashes in an upward direction Final measurement is greater than 109.4 °F/43.0°C.