American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 53)

43
Could I use the ADview to measure blood pressure during a stress test?
Although your ADview is a robust device that has been manufactured with motion tolerance, it is not
intended for use during stress testing.
Should I wait between temperature measurements?
Yes. Accurate temperature measurement requires the probe to be at normal room temperature. After taking
a measurement, wait for the probe to return to room temperature or wipe the probe with an alcohol wipe
before taking a subsequent measurement.
Do I need to calibrate the temperature or pulse oximetry modules?
For calibration or service on the ADview temperature and pulse oximeter modules, contact an authorized
service center on page 46.
How accurately does the ADview temperature module measure temperature?
The ADview temperature module is accurate to +/- 0.2 °F (+/-0.1°C).
What is the accuracy of the ADview pulse oximetry module?
The ADview pulse oximetry module is +/- 2% in the 70 to 100% range for no motion and normal perfusion.
For motion or low perfusion, the accuracy is +/- 3%.
When does the warranty period begin?
The warranty for your ADview begins on the date of shipment of your device.
How do I make a warranty claim for the ADview?
Contact an authorized service center on pages 46 - 47.
How do I get my ADview to communicate with my EMR/EHR software system?
You must have the optional Bluetooth capability to allow communication with any EMR/EHR system.
Please contact your IT administrator or EMR/EHR system provider about configuring your ADview for
communication. Software development kits are available from ADC for EMR/EHR vendors to support
communication with the ADview.