Kofax Communication Server 9.1 - Manual (Page 163)

Client Applications Administrator‘s Manual Version 5.32.00
©Kofax, Inc. 163/203
The advantage is that the user need not change to TCfW to get for example a part of the
image into the zoom window. All these features of the message window can be controlled by
another application.
16.4.1 Commands for Message Window (MSG=...)
The following list of DDE commands only works if TCfW is started and a message window is
active. The DDE commands always act on the last message that had the focus. If more than
one message is opened the last active message reacts to the DDE commands. Whether the
message was opened manually or automatically (in the distributor mode), does not influence
the DDE commands.
All message window related DDE commands have to begin with ‗MSG=‘ followed by the
command keyword. (e.g. MSG=IMAGEMODE)
Command Description
TXTMODE Message window is displayed in text mode
IMGMODE Message window is displayed in image mode
CLOSE Closes the active message. Does not suppress any
messages like ‗Message not saved ...‘. Message stays in
the distributor queue.
TERMINATE Message is removed from the distributor queue.
Command returns ‗Ok‘ on success or ‗NOk‘ in case of
problems.
SEND Sends the active message
PRINT Opens the print window
PAGEUP Shows the previous screen of the message (image and
text mode)
PAGEDOWN Shows the next screen of the message (image and text
mode)
ZOOMIN Zoom in once (image mode only)
ZOOMOUT Zoom out once (image mode only)
FLIP Rotate clockwise 180 degrees (image mode only)
ROTATE Rotate 90 degrees (image mode only)
OPTIMIZE Optimized image view (image mode only)
FULLPAGE Show full page (image mode only)
SHOWPAGE,nnn Positions the viewer on page nnn. 0 shows first page with
header, 1 shows first page without header (image mode
only)
ZOOMWINDOW,ON Starts the zoom window in invisible mode and returns the
windows handle. This handle can then be used to size and
position the window and to change between visible and
invisible by means of windows API functions (image mode
only).
ZOOMWINDOW,OFF Closes the zoom window (image mode only)
ZOOMREFERENCE Sets the basis for the zoom factor. For example if the
message
is viewed in full page mode and
ZOOMREFERENCE is executed a zoom factor of 100
references to this representation.
IMAGEVIEW,x,y,factor Sets the x and y position in millimeter and the zoom factor
(100 = 1/1) in the main image window (image mode only).
IMAGEVIEWZOOM,x,y,factor Sets the x and y position in millimeter and the zoom factor
(100 = 1/1) in the zoom window (image mode only).
IMAGEVIEW,IMAGEVIEWZOOM The x and y positions are specified in millimeters from the
upper left corner of the original page. An original A4 fax
page is 21cm * 29cm. So if the lower half should be