Hangar 9 Beast 100cc ARF - Manual (Page 52)

52
 Step 6
Run (2) 24-inch extensions from the receiver
for the bottom wings and (2) 36-inch
extensions for the top wings. Extensions
can be secured with hot glue or CA but the
advantage of hot glue is it won't damage the
extension coating and is easy to remove. In
case of using CA, it would be best to pass
your extensions through nylon tubing or heat
shrink.
Top wing extensions can be secured to the
struts using black electrical tape or by cutting
strips of black UltraCote, making a loop and
ironing them to the struts.