beautypg.com

Hangar 9 Beast 100cc ARF User Manual

Page 48

background image

48

Step 2

The tray is now ready to be secured to the

fuselage frame. Scratch up the surface that

will sit on the fuselage rail with a hobby knife.

Mix some 30-minute epoxy and brush it up on

the tray. Apply a small amount to the fuselage

frame and place the tray in the fuselage. Add

some weight until the epoxy cures.

Note: In the picture above a

crescent wrench that has some

weight has been placed on top of

the batteries with two small clamps.

Make sure you do not move the

fuselage, which can drop the

weight and damage the fuselage.