Landing gear and wheel pants assembly – Hangar 9 Beast 100cc ARF User Manual
Page 14
![background image](/manuals/657619/14/background.png)
14
Required Parts
• Fuselage assembly • Main landing gear
• #8 washer (4)
• 8-32 locknut (4)
• Axle w/nut (2)
• #4 washer (4)
• 4-40 blind nut (4)
• 4
1
/
2
-inch (114mm) wheel (2)
• 4-40 x 1/2-inch socket head screw (4)
• 5/32-inch wheel collar with setscrews (4)
• #12 wrench and crescent wrench
Required Tools and Adhesives
• Threadlock
• Hex wrench: .050-inch, 3/32-inch
Step 1
Install the shaft on the gear.
Step 2
The landing gear should be installed such
that it is swept forward. Install the wheel
collar. Use threadlock on the setscrew. It is
best to file the axle where the setscrew sits.
Follow the measurement shown for the wheel
to be centered in the pant.
Landing Gear and Wheel Pants Assembly