Hangar 9 Beast 100cc ARF - Manual (Page 5)

5
Radio and Power Systems Requirements
• 7-channel computer radio system (minimum) with receiver • Large Servo Arms (JRPA236)
(6 pkgs)
• 3-Inch Double-Sided JR Arm (JRPA237) (1)
• 24-Inch Servo Lead Extension (JRPA102) (5) • JR Charge Jack Switch (JRPA004) (1)
• 36-inch Servo Lead Extension (JRPA103) (2) • Choke Ring (JRPA029) (For throttle servo
lead)
• JR 8711 or 8911HV metal gear high-torque digital servos (7) or equivalent
Caution
: Only metal-geared digital servos of 320 oz-in torque or greater should be used on the
control surfaces except for the rudder that should use greater than 400 oz-in.
• (2) 2000mAh or larger Li-Po for receiver (A minimum of 4000mAh is required when using
super high-torque servos)
• 1350mAh or larger for ignition (4.8 or 6.0V))
The elevator installation requires:
Two servos and mixing through the radio Or Two servos and a JR® MatchBox™ (JPA0900)
The ailerons installation require:
Four servos and mixing through the radio Or Four servos and two JR® MatchBox™
Recommended JR, JR SPORT and Spektrum Systems
• JR 12X
• JR XP9303
• JR X9303 2.4
• Spektrum™ DX7
Recommended Engine Setup
DA-100L
• In cowl mufflers
or
• MTW TD75 canisters with flex 50mm drop headers
• 26x12, 27x10 propeller
The Spektrum trademark is used with permission of Bachmann Industries, Inc.