Hangar 9 Pulse XT 40 ARF User Manual
Pulse xt 40 arf, Assembly manual
Wingspan...................................60.7.in.(1540.5mm)
Wing.Area................................667.sq.in.(43.sq.dm)
Length..............................................50.in.(1270mm)
Assembly mAnuAl
Pulse XT 40 ARF
Weight................. Glow:.5.5–6.25.lb.(2.5.kg–2.8.kg)
............... Electric.w/o.battery:.4.7–5lb.(2.1–2.3.kg)
Specifications
5.
Table of contents
Document Outline
- UltraCote® Covering Colors
- Radio and Power Systems Requirements
- Contents of Kit
- Required Items for Electric Installation
- Field Equipment Required
- Optional Field Equipment
- Required Tools and Adhesives
- Limited Warranty & Limits of Liability
- Safety Precautions
- Questions, Assistance, and Repairs
- Questions or Assistance
- Inspection or Repairs
- Warranty Inspection and Repairs
- Non-Warranty Repairs
- Warranty Information
- Before Starting Assembly
- Using the Manual
- Section 1: Aileron Installation
- Section 2: Hinging the Stabilizer
- Section 3: Hinging the Rudder
- Section 4: Landing Gear Installation
- Section 5: Servo Installation
- Section 6A: Tail Installation
- Section 6B: Gluing the Tail (Optional)
- Section 7A: Electric Motor Installation
- Section 7B: Glow Engine Installation
- Section 8: Final Assembly
- Control Throws
- Recommended Center of Gravity (CG)
- Pre-Flight
- Range Test Your Radio
- Adjusting the Engine (Glow)
- Maintaining Your Pulse XT ARF
- Glossary of Terms
- 2006 Official AMA National Model Aircraft Safety Code