Hangar 9 Beast 100cc ARF - Manual (Page 20)

20 20
Elevator Hinging
Required Parts
• Left elevator
Required Tools and Adhesives
• 30-minute Epoxy
• Alcohol swabs
• Petroleum jelly
• Mixing cup and tooth pick
• Heating iron
 Step 1
The left elevator half is not hinged on the stab
side so you are able to glue the stab in the
fuse. Go over the edges with a heating iron.
Then apply some petroleum jelly to the pins.
Avoid getting oil on the hinge itself. Wipe with
alcohol if that happens.
 Step 2
Using 30-minute epoxy, glue all the way in
and around the pocket walls of the pockets in
the stab. Then apply some to the hinge itself.