Cub Cadet 2000 Series - Manual (Page 86)

2000 Series Tractors
80
Greasing the steering housing
The steering housing should be greased every 25
hours. To grease the steering housing:
1. Lift and safely support the front of the tractor.
2. Inject grease into the grease fitting at the steering
pinion gear until grease starts to ooze out.
See Figure 6A.27.
3. Lower the tractor to the ground.
4. Open the hood.
5. Inject grease into the grease fitting at the steering
housing pivot shaft until it starts to ooze out.
See Figure 6A.28.
NOTE: An 18” flexible extension hose for the
grease gun will make it easier to reach the
grease fitting.
Figure 6A.27
Grease fitting
Figure 6A.28
Grease fitting