Cub Cadet 2000 Series - Manual (Page 14)

2000 Series Tractors
8
9. Unthread the fuel cap.
10. Pull the fuel cap tether retainer out of the fuel tank
using a long pair of pliers. See Figure 2.8.
NOTE: The fuel cap tether is mandated by the EPA.
If it is broken, the fuel cap must be replaced.
11. Gently pry out the barbed fasteners that hold the
end of the running board mats to the fender.
See Figure 2.9.
12. Remove the six nuts and bolts, indicated by the
arrows in Figure 2.10, that hold the fender to the
running board using a pair of 7/16” wrenches.
13. Lift the fender off of the tractor.
Figure 2.8
Tether
Figure 2.9
Barbed fasteners
Figure 2.10