Chapter 4: body, What is covered by this chapter, Hood – Cub Cadet 2000 Series User Manual
Page 31
Body
25
What is covered by this chapter
The intent of this chapter is to describe the removal and disassembly of the major body panels on the tractor.
•
Hood
•
Seat
•
Fenders
•
Dash panel
NOTE: It is not absolutely necessary to remove the mowing deck for any procedures covered in this section.
The technician may choose to remove the mowing deck so that it is easier to reach some parts of the
tractor.
Hood
Hood removal:
1. The hood is front-hinged. See Figure 4.1.
2.
Open the hood by lifting the rear edge to tilt it for-
ward.
3.
Disconnect the headlight harness. See Figure 4.2.
Figure 4.1
Lift here
Figure 4.2
Headlight harness connector
CHAPTER 4: BODY
See also other documents in the category Cub Cadet Special machinery:
- G1332 (20 pages)
- i1046 (36 pages)
- i1046 (32 pages)
- 54M (28 pages)
- 980 (20 pages)
- 949 (20 pages)
- Time Save (28 pages)
- 990 (24 pages)
- 997 (36 pages)
- V469 (20 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (28 pages)
- 4 Fabricated Deck (32 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (36 pages)
- M48-M60-KW (28 pages)
- 4 Fabricated Deck (36 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (32 pages)
- CC 500 BAT (30 pages)
- CC 22 (20 pages)
- CC 949 (13 pages)
- 33" Wide Area (29 pages)
- Z-Wing (88 pages)
- TANK S Series: Electrical System (9 pages)
- TANK S Series: Hydraulic Drive & Steering System (12 pages)
- TANK S Series: Steering System Adjustments (11 pages)
- 640 (20 pages)
- 640 (24 pages)
- 641 (24 pages)
- 641 (20 pages)
- J466 (32 pages)
- Series C460 (28 pages)
- 435A (24 pages)
- 642 (24 pages)
- 414 (24 pages)
- M465 (28 pages)
- Fun Runner (117 pages)
- 4 x 2 Big Country - Steel Bed (38 pages)
- 4 x 2 Big Country - Poly Bed & Steel Bed (82 pages)
- 4 x 4 Volunteer (328 pages)
- 6 x 4 Big Country (121 pages)
- CC 4BP 32cc (29 pages)
- 2518-48 (60 pages)
- 1525 (39 pages)