Cub Cadet 2000 Series - Manual (Page 15)

Engine Related Parts
9
14. Re-install the fuel cap.
15. Disconnect the vent hose from the roll over valve.
See Figure 2.11.
16. Roll the fuel tank towards the rear of the tractor until it
is free from the tractor. See Figure 2.12.
17. Disconnect the fuel line from the fuel tank.
18. Install the fuel tank by following the previous steps in
reverse order.
19. Test run the tractor in a safe area before returning it
to service.
Figure 2.11
Vent hose
Roll over valve
Figure 2.12
Roll out