Cub Cadet 2000 Series - Manual (Page 154)

2000 Series Tractors
148
7. Carefully route the PTO belt so that it clears the
deck.
8. Pull the deck support pin outward to release the
deck from the lift link on both sides of the deck.
See Figure 8.2.
9. Move the deck lift lever to the highest cutting posi-
tion.
NOTE: On tractors with an electric lift, use the lift
switch to raise the lift links to their highest
position.
10. Slide the cutting deck forward, while guiding the
hooks on the front of the deck off of the front
hanger.
11. Slide the deck to the right, out from underneath the
tractor.
12. Install the deck by following the above steps in reverse order except the belt. The belt goes on the deck drive
pulley last.
IMPORTANT: Inspect the discharge chute, spindle covers and excluder bars before installing the deck. Repair
or replace any damaged or removed safety device. Do not put an unsafe deck back into ser-
vice.
Figure 8.2