Cub Cadet 2000 Series - Manual (Page 60)

2000 Series Tractors
54
9. Remove and discard the output shaft seal from the
right transmission case using a flat blade screw-
driver.
10. Remove the four screws securing the front torque
bracket, spacers and the pump to the transmission
using a 1/2” wrench. See Figure 5.38.
NOTE: The 3/4” spacers are located at the top, and
the 3-1/2” spacers are located at the bottom.
11. Remove the front torque bracket, spacers and pump
from the right transmission housing.
12. Remove the spring washer and the gland seal from
the right transmission housing. See Figure 5.39.
Figure 5.37
Output shaft
Figure 5.38
Torque bracket
Figure 5.39
Spring washer
Gland seal