Cannon Instrument miniPV-X - Manual (Page 89)

83
CANNON ® miniPV-Series Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.a— January, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
miniPV Series repair/replacement components
The parts included in the list below are the more common repair/replace-
ment components for the miniPV Series.
When making repairs using these items, make certain to replace obsolete
or worn components with matching components.
Installation kit The installation kit contains all parts required for assembly/installation of
the miniPV Series. Kit replacements may be purchased from
CAN-
NON ®
(part #P81.2879).
The installation kit contains the following components:
DC Power Cable • AC Power Cord • (12’) 1/8” solvent tubing • (2)
solvent filters • (2) bottle caps • (6’) VAC waste line (6 mm) • (2’) 1/8”
air line • 6 mm tubing for waste b union • Serial cable • 9(F)-24(M) cable
adapter • bath fluid • Bath Fill Cap Assembly • 3”-4” vent coupling
adapter • tubing cutter • wrench
Spare parts kit The spare parts kit contains a variety of tools used to accomplish minor
service and replacement procedures. Refer to your packing list for a
description of kit components. Kit replacements may be purchased from
CANNON ® (part #P81.2417).
The spare parts kit contains the following components:
(4) fuses (8A for 115V, 4A for 230V unit • (2) 6mm SMC fittings • drive
belt • 3/16” hex key for drain • (2’) drain tubing • 7/54 Hex key for
elevate sensor