Cannon Instrument miniPV-X - Manual (Page 74)

CANNON ® miniPV-Series Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.a— January, 2011; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
68
Saving Sample ID information
Many users will test the same series of samples on a regular basis for
trend analysis and other quality control objectives. To save time with
Sample ID data entry, VISCPRO provides an option for saving and
recalling Sample ID information.
Saving Sample IDs To save Sample IDs, complete your sample ID data entry (see previous
sections) from the
Sample Input window, then click the Save IDs
button. The Samples window will open.
Input an ID for the saved sample sequence in the Save As: field. Then
select which instrument(s) to associate with the Sample ID sequence.
Then click
OK .
Restoring Sample IDs To restore Sample IDs previously saved, click Configuration and select
the desired instrument. Then click Restore Instrument and Tray
Settings from the Configuration options. The Load Instrument and
Tray Settings window will open.
Select which data is to be restored by clicking on the desired Restore
options ( Restore Instrument Settings , Restore Tray Settings , and/or
Restore Sample Information ). The Load Instrument and Tray
Settings window permits you to restore the following Instrument
Settings : Instrument UserID, check standard prompts, temperature
calibration offsets
The Load Instrument and Tray Settings option permits you to restore
the following Tray Settings : Tube S/N, tube type, wet tube option, bath
temp, and tube calibration constants.