Cannon Instrument miniPV-X User Manual
Page 16
CANNON
®
miniPV-Series Automatic Viscometer with VISCPRO
®
Instruction & Operation Manual
Version 1.a— January, 2011;
CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
10
2. Select your instrument from the list of available instruments (there
may be only one instrument in the list).
3. Select
Instrument Settings
from the list of configuration options.
The
Instrument Settings
window will appear.
You will use the
Instrument Settings
window (see below) to describe
and control miniPV Series instrument operational features. These settings
affect the instrument as a whole. Check the instrument settings for your
instrument per the instructions below, and make any necessary changes:
The Instrument Settings window
Use the
ID
field to input instrument identification information using up to
16 alphanumeric characters.
The
S/N
: field (non-editable) indicates the serial number from the label on
the miniPV Series rear service panel.
Prompt options
The Prompt for Check Standards options permit you to set a computer-
ized “alarm clock” which will pop up a message reminder to run a check
standard based on the schedule you set with the control. Notice that you
can specify a reminder after “x” number of days and/or “x” number of
samples. Click the check box(es) to enable/disable each reminder.
When you have verified all settings, click OK.