Care and storage, Care, Clean and dry – Leica Geosystems Leica DISTO Pro User Manual
Page 56: Storage, Transport, Despatch, Care and storage care
58
DISTO pro
4
/ pro
4
a-1.0.0en
English
en
Care and Storage
Care
Clean and dry
Blow away dust from lenses.
Do not touch glass with fingers.
Only clean with a soft cloth; if
necessary, damp with pure alcohol.
Do not use other cleaning agents.
Plastic parts could be affected.
Wipe off splashes of cement, plaster
etc. as quickly as possible, using
water and a damp cloth or sponge.
Look after the optical surfaces with
the same care that you would apply
to spectacles, cameras and field
glasses.
Storage
Please respect the
temperature limits, specially
during summer when storing the
equipment inside a vehicle
(-40°C to +70°C / -40°F to +158°F).
Unpack instruments and
accessories that have
become wet. Dry off the instrument,
container and accessories (at
maximum 40 ºC / 108 ºF) and clean.
Only repack the equipment when it is
completely dry.
After longer periods of
storage or transport carry out
a check measurement before using
the equipment.
If the indoor and outdoor
temperatures are very different, allow
time for the instrument to adapt
If the DISTO is removed from an air-
conditioned room and exposed to
warm damp air, the instrument and
the optics will fog over. To reduce
this effect, cover the instrument with
a cloth and allow it to adapt slowly to
the new conditions as you would for
a camera or a video.
Transport
The Leica Geosystems holster
protects the DISTO well against
mechanical shock, but not against
water or dust.
It is recommended that you always
transport the DISTO in the Leica
Geosystems holster or an equivalent
protective container or packaging.
Pack the end cover into the holster
as shown below.
Please ask if you may take DISTO as
hand luggage when travelling by air.
Despatch
Always use the original Leica
Geosystems packaging
(holster and shipment box) for
sending the instrument.
You must remove the batteries (send
the instrument without batteries).
Do not exceed temperature limits.
PD-Z77