Leica Geosystems Leica DISTO Pro - Manual (Page 25)

27 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
After pressing the Enter key, a short
confirmation appears and the menu
function is terminated.
DISTO changes to Normal mode and
displays basic settings.
The symbol in basic settings
is now the end cover with
swivel foot.
Aligning aid (2.5)
This menu function
- sets rear reference for the DISTO to
the end cover with positioning
bracket / alignment aid,
- only appears when automatic end
cover recognition is turned off.
After pressing the Enter key a short
confirmation appears and the menu
function is terminated.
DISTO changes to Normal
mode and displays basic settings.
The symbol in basic settings
is now the end cover with
positioning bracket /
alignment aid.
Basic settings (3)
, 2x
Units (3.1)
Sets the unit in which DISTO
displays measurement and
computation results. Additionally,
when using the metric system the
amount of decimal digits can be set.
Default setting: 0.000 m (3.1.1)
0.000 m (3.1.1)
After selecting this menu function
- the menu is quit and the basic
setting displayed.
- display is then in meters accurate to
three decimals.
0.00 m (3.1.2)
After selecting this menu function
- the menu is quit and the basic
setting displayed.
- display is then in meters accurate to
two decimals.
0.00 ft (3.1.3)
After selecting this menu function
- the menu is quit and the basic
setting displayed.
- display is then in feet as decimal.
0'/00"/32 (3.1.4)
After selecting this menu function
- the menu function is terminated and
the basic setting displayed.
- display is then in feet and inch.
With inch values, decimals are
diplayed as fraction of 1/32.
Example: 8.5 inch = 8 in 16/32
0.0 in (3.1.5)
After selecting this menu function
- the menu function is terminated and
the basic setting displayed.
- display is in inches with one decimal
accuracy.
0"/32 (3.1.6)
After selecting this menu function
- the menu function is terminated and
the basic setting displayed.
- display is in inch.
With inch values, decimals are
diplayed as fraction of 1/32.
menu
1 measure settings
2 end cover
3 basic settings
4 basic functions
5 calculation
6 memory
basic settings 3
1 units
2 language
3 beep
4 reset
5 lighting
6 switch off
units 3.1
1 0.000 m
2 0.00 m
3 0.00 feet
4 0'00"/32
0.000 m